La Piccola PICCOLA PICCOLA - Machine Installation; Electrical Connection; Filling the water tank

19
4. MACHINE INSTALLATION
Note: in the machine there might be traces of coee, these are aributable to tests carried
out by the Manufacturer to ensure the highest quality product. Before using the machine for
the rst me, it is necessary to thoroughly clean its components; for further details see the
relevant paragraph.
Before operaon, proceed to correctly install the machine. Aer removing the unit from its packaging, proceed as follows:
• Place the machine on a rm, at surface;
• Make sure that it is not accessible to children;
• Keep it away from hot surfaces or open ames; Keep the machine at a distance of about 15 cenmetres from other devices.
We recommend retaining the packaging for subsequent moves or transports.
4.1. Electrical Connection
Warning: Electric current can be dangerous! Therefore, always follow and adhere to the sa-
fety standards. Do not ever use faulty cords.
The operang voltage of the device is set at the factory; it is necessary to verify that the mains voltage matches the indicaons
on the technical data plate. Before connecng the machine to the power supply, ensure that both buons are not pressed.
Insert the plug into a suitable power outlet.
4.2. Filling the water tank
To operate the machine ll the water tank.
Cauon: To ll the tank, use only fresh drinking water; Hot water or soda can damage
the machine. Before starng the machine, check that there is a sucient
quanty of water.
• (Fig.1) - Remove the cap from the water tank • (Fig.2) - Remove the tank from the machine.
• (Fig.3) - Fill the tank with fresh drinking water.
• (Fig.4) - Place the full tank in the machine, then place the cap on the tank paying aenon to the tube inside, verifying that it
touches the base of the tank and there are no pressures that could potenally jeopardize the retrieval of water.