Launch CRT 501 Series User Manual

LAUNCH CRT 501 Series User Manual
13
4.3.4 Report
This option allows you to manage diagnostic report.
4.3.5 Display/Brightness
This item allows you to set the standby time and screen brightness.
Note: Reducing the brightness of the screen is helpful to conserve the power of
the tool.
4.3.6 Sound
This option lets you adjust the volume and other sound settings.
4.3.7 Network
Note: Once WLAN is set as ON, the tool will consume more power. While it
keeps unused, please set it o to save power. While WLAN keeps unused, please
turn it o to conserve battery power.
The tool has built-in WLAN module that can be used to get online. Once you’re
online, you can register your tool and update diagnostic software & APK.
Slide the switch to ON, the system starts searching for all available wireless
LANs. Choose the desired WLAN access point / network to connect.
4.3.8 Time Zone
This option allows you to set the system time zone.
4.3.9 Language
The tool supports multiple languages. You can use this option to change the
system language to the target language.
4.3.10 Region (TPMS)
This option allows you to set the target region where the TPMS sensors are
being applied.
4.3.11 Workshop information
This option can set up the default email address for receiving the diagnostic
reports or screenshots.

Launch CRT 501 Series Specifications

General

Brand	Launch
Model	CRT 501 Series
Category	Scanner
Language	English