Launch CRT 501 Series User Manual

LAUNCH CRT 501 Series User Manual
36
7 Reset
In addition to amazing & powerful diagnostic function, the tool also features
various service functions.
There are two methods to reset service lamp: Manual Reset or Auto Reset.
Auto Reset follows the principle of sending command from the tool to vehicle’s
ECU to do resetting. While using Manual Reset, users just follow the on-
screen instructions to select appropriate execution options, enter correct data
or values, and perform necessary actions, the system will guide you through
the complete performance for various service operations.
Follow the owchart shown as below to perform resetting.
Select "Reset"
Choose the desired service
function
Select the desired car brand
Select the reset mode (The
available mode varies from
vehicle to vehicle)
Follow the on-screen
instructions to proceed
7.1 Maintenance Light Reset (Oil Reset)
This function enables you to reset the oil service lamp for the engine oil life
system, which calculates an optimal oil life change interval depending on the
vehicle driving conditions and weather events.
It needs to be performed in the following cases:
• If the service lamp is on, run car diagnostics rst for troubleshooting.

Launch CRT 501 Series Specifications

General

Brand	Launch
Model	CRT 501 Series
Category	Scanner
Language	English