Launch CRT 501 Series User Manual

LAUNCH CRT 501 Series User Manual
31
6 OBD II Diagnosis
6.1 Connection
1). Turn the ignition o󰀨.
2). Locate the vehicle’s 16-pin Data Link Connector (DLC). Refer to Chapter
2.4.
3). Plug one end of the diagnostic cable into the vehicle’s DLC(Data Link
Connector) port, and the other end to the DB-15 diagnostic connector of
the tool, and then tighten the captive screws.

Launch CRT 501 Series Specifications

General

Brand	Launch
Model	CRT 501 Series
Category	Scanner
Language	English