LAUNCH Start Diagnostics
23
5.2 System Scan
This option allows you to quickly scan which systems are installed on the
vehicle.
In Fig. 5-2, tap “System Scan”, the system start scanning the systems. Once the
scanning is complete, the screen will display the result. See Fig. 5-6.
Fig. 5-6
In Fig. 5-3, tap the desired system to advance to the test function selection page.
For detailed operations on test function, please refer to Chapter 5.3.
5.3 System Selection
This option allows you manually select the test system and function step by step.
In Fig. 5-2, tap “System Selection”, the screen displays as follows: