Launch X-431Diagun User Manual

LAUNCH X-431Diagun User's Manual
7
2.5 X-431Diagun Start
2.5.1 Power on
Press [POWER] key in the top right-hand
corner of the main unit top. Main unit will
display the initialization screen, as shown
on the left.
Note: Power off by pressing [POWER] key
for 5 seconds at least.
After reading the system bar on the
initialization screen, operate following the
indication, as shown on the left.

Launch X-431Diagun Specifications

General

Brand	Launch
Model	X-431Diagun
Category	Diagnostic Equipment
Language	English