Keor MOD
Installation and maintenance manual
13
3.3 Transportation
WARNING
The UPS must be placed and stand in a vertical position throughout the transportation. It shall also be packed properly.
Move the UPS very carefully, lifting it as little as possible and avoiding dangerous swings or falls.
Follow always the directions indicated in the symbols present on the packaging.
The equipment must always be handled by trained and instructed personnel. Comply with the safety regulations in force
in your country relative to the usage of lifting equipment and/or accessories.
For any lifting, use a forklift or a transpallet with an adequate carrying capacity, placing the forks in the specific spaces of
the base and making sure they come out on the other side by at least twenty centimetres.
Keor MOD UPS has four wheels at the bottom of the cabinet. Before installations and while it is still empty, it can be moved
by hand by at least two people.
CAUTION
Do not move the UPS after the installation or following the insertion of the power modules.