GR30/GM30/GR50, Equipment Setup
44
6 Equipment Setup
6.1 Basic Setup
Description
Step Description
1. Plug the power cable/power supply into the GR30/GM30/GR50.
2. Insert the SD card into the SD card slot. For more information on how to
work with the SD card, refer to "7.3 Working with the Memory Device".
3. Turn on the GR30/GM30/GR50.
4. Attach the antenna cable, for example the GEV194, 1.8 m antenna cable, to
the instrument’s antenna port and to the connector on the antenna.
To access the instrument via Ethernet or USB refer to:
• "6.2 Setup via Web Interface over Ethernet and DHCP"
• "6.3 Setup in a Non-DHCP Network"
• "GR50 setup in a non-DHCP network using display and buttons"
• "6.4 Install USB drivers"
• "6.4.2 Setup via Web Interface over USB"
Refer to the "GR/GM Series Operational Manual (Online Help)" for detailed
information on the web interface.
1
2
3
4
011645_001
To Next Page
Loading...
Need help?
General
