12
If the system is running in compressor protection,
the home screen displays “WAIT” only if there is
cooling call for the compressor (Y1).
If compressor protection is running and there is a
demand for electric heating, the system waits for the
compressor protection timer to expire.
Custom Reminders
Two custom reminders may be rename on this
screen to the desired name (name is limited to 19
characters). After entering the new name, touch the
done key to return to the customer reminder screen.
To set a reminder go to the User Settings screen and
select reminders. The reminder setting screen will
appear and a list all of the predefined reminders plus
the two custom reminders will appear at the end of
the list.
Scroll to CUSTOM REMINDER 1 or 2 (or renamed
titles). Touch the title to select the reminder. By de
fault all reminders are set to disabled. Touch disable
to choose from 3mon, 6mon, 12mon, 24mon or cus
tom date.
When finished, touch < to return to previous menu.
Reset Settings
To reset the thermostat to factory defaults, scroll to
RESET SETTINGS and touch to select. Read the
message and to continue touch CONFIRM.
IMPORTANT
RESET SETTINGS erases all programming and
returns the thermostat to the factory conditions,
including the installer settings. Use this only as a
last resort.
Energy saving Default
Energy saving recommended set points for heating
and cooling can help save energy. The time and
temperatures reference in table 1 are pre-pro
grammed into the thermostat to achieve energy sav
ings.
Scroll to ENERGY SAVING DEFAULT and touch to
select. Read the message on the screen and to con
tinue, touch CONFIRM.
Table 1. Energy Saving Set Points
Time Heating Cooling
Wake 70°F (21°C) 78°F (25°C)
Leave 62°F (17°C) 85°F (29°C)
Return 70°F (21C) 78°F (25°C)
Sleep 62°F (17°C) 82°F (28°C)
System Test Modes
After the thermostat has been installed and set-up,
the installer may run a system test function (ac
To Next Page
Loading...
Need help?
General