Lennox M0STAT120N-1 User Manual

11
Operations
Set Time and Date
1. Press the Timer button for a minimum
of two seconds. The Timer display
ashes.
2. Press the Up/Down buttons to set the date.
The selected date ashes.
3. Press the Conrm button to set the
date.
4. Press the Up/Down buttons to set the time.
Press either button repeatedly to adjust
the time in one minute intervals or press
and hold until the current time is reach.
5. Press the Conrm button to set the
time.
NOTE: Press both the Timer and Day
O/Delay buttons to alternate the
clock time display to either 12 hour
or 24 hour format.
Lock Function
1. Press both the Function and Swing
buttons at the same time for three
seconds to activate the Lock function.
This also disables all button functions on
the controller. When the Lock function
is activated, a lock icon displays on the
controller’s screen.
2. Press both the Function and Swing
buttons for three seconds to deactivate
the Lock function.
Louver Swing Function
Units with Up/Down and Left/Right
Swing Functions Only
1. Press the Swing button to start the
up and down swing function. Press it
again to stop.
2. Press and hold the Swing button for
two seconds to start the left and right
swing function. Press and hold again
for three seconds to stop.
Units with Up/Down Swing Functions
Only
1. Press the Swing button to start the
up and down swing function. Press it
again to stop.
NOTE: Each time the Swing button is
pressed, the louver swings an
angle of six degrees. Continue to
press the button until the desired
direction is reached.
2. Press the Swing button for two seconds
to activate auto swing. The horizontal
swing icon displays on the controller’s
display.

Lennox M0STAT120N-1 Specifications

General

Brand	Lennox
Model	M0STAT120N-1
Category	Controller
Language	English