Lenovo M500 User Manual

6. Reverse steps 1 to 5 to install the new lamp module.
Resetting the lamp
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
1. Press the Menu button to open the Main menu.
2. Press the left or right cursor button to move to the Information menu.
3. Press the up or down cursor button to move down to Lamp Hour Reset.
A-2 M500 Projector User’s Guide

Lenovo M500 Specifications

General

Brand	Lenovo
Model	M500
Category	Projector
Language	English