8. Install the VESA mount bracket to the wall mount bracket.
9. Install the screw to secure the VESA mount bracket to the wall mount bracket.
10. Reconnect the external cables and power adapter to the corresponding connectors on the computer,
and then reconnect the power cord to the electrical outlet.
Rear Wi-Fi antenna
Note: The rear Wi-Fi antenna is available only on some models.
Prerequisite
Before you start, read Appendix A “Important safety information” on page 51 and print the following
instructions.
Replacement procedure
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect the power cord from the electrical outlet and disconnect all cables from the computer.
Chapter 7. CRU replacement 41