Lenze g500-H User Manual

Dimensions
Notes on the basic dimensions
Gearbox Without pre-stage With pre-stage
g500-H45 2-stage -
g500-H100 … g500-H140 2-stage 3-stage
g500-H210 … g500-H3000 2-/3-stage 4-stage
The rao range of gearboxes with pre-stage is extended via an addional housing with gear
stage between the gearbox and motor.
The basic dimensions are shown without pre-stage and are valid up to the following deviang
dimensions for gearbox with pre-stage valid:
•
Total length “L”
•
Center distance “a” (gearbox output sha – motor sha)
Deviang dimensions: 4Gearbox with pre-stage ^ 117
The following legend shows the layout of the dimension tables:
Motor MF☐MA☐☐
063-32 063-42 071-32
Table content Explanaon
Total length L Total length of the drive without brake/feedback
Motor length LB Length of the motor without brake/feedback
Motor diameter AC Motor diameter
Motor/connecon distance AD Distance from center of motor to end of terminal box
The dimensions shown in the dimensional drawings for the solid shas with
featherkey (V□□) also apply for solid shas without a keyway (G□□).
Please observe the available output sha designs!
4The modular system ^ 10
If the mounng area (foot support) towards the motor is longer than the
gearbox foot, some motors collide with the mounng area!
For an accurate check of the geometrical data, Lenze recommends the use of
the »Product Finder« at www.Lenze.com.
Technical data
Dimensions
81

Lenze g500-H Specifications

General

Brand	Lenze
Model	g500-H
Category	Industrial Equipment
Language	English