Commissioning and operation
Important notes
5
33
Lenze ¯ MA 12.0018 ¯ 2.0
5 Commissioning and operation
5.1 Important notes
Stop!
The drive may only be commissioned by skilled personnel!
¯ Before commissioning remove transport locking devices and keep them for later
transports.
¯ Take safety measures prior to any operation:
– Disconnect the machine from the mains, ensure standstill of the drive system
and avoid any machine movement.
5.2 Before switching on
Please check:
¯ Drive function - machine function assignment
¯ The direction of rotation of the drive shaft
g500−S 2−stage g500−S 3−stage
¯ Does the drive appear undamaged?
¯ Is the mechanical fixing o.k.?
¯ Is the electrical connection correct?
¯ Are all rotating parts and surfaces that may become hot protected against
contact?
¯ For gearboxes with breathing elements:
– Has the transport locking device been removed?
Stop!
At drive speeds below 200 rpm the amount of lubricant may need to be
increased. Consultation with Lenze is required.
To Next Page
Loading...
Need help?
General
