Maintenance
Important notes
6
35
Lenze ¯ MA 12.0018 ¯ 2.0
6 Maintenance
6.1 Important notes
Note!
¯ Gearboxes below 200 Nm are lubricated for life.
¯ The mechanical power transmission system is maintenance−free.
6.2 Maintenance intervals
¯ For gearboxes that are not lubricated for life, the lubricant has to be replaced at
regular intervals.
– The type of lubricant is indicated on the nameplate. Replace the lubricant only
with the same type of lubricant.
– The lubricant maintenance interval depends on the lubricant temperature, see
Fig. 14.
Stop!
With drive systems: observe the maintenance intervals for the other drive
components!
A
100
60
1000
10000
50000
70
80
90
110
B
C
D
Fig. 14 Lubricant diagram
Oil sump temperature [°C]
Synthetic oil CLP HC/CLP PG
Oil life/changing intervals [operating
hours h]
Mineral oil CLP
Stop!
Irrespective of the operating hours, an oil change must be carried out
every three years at the latest!
6.3 Maintenance operations
Gearboxes and geared motors are ready to use on delivery and filled by Lenze with the
lubricant type and lubricant quantity indicated on the nameplate. The first filling
corresponds to the mounting position and design indicated on the nameplate.
To Next Page
Loading...
Need help?
General
