Safety instructions
Application as directed
2
9
Lenze ¯ MA 12.0018 ¯ 2.0
2.2 Application as directed
Low−voltage machines are not household appliances, but are intended as components
that are only applied for re−use for industrial or professional purposes in terms of
IEC/EN 61000−3−2.
They meet the requirements of the Low−Voltage Directive 2006/95/EC and the
harmonised standards of the IEC/EN60034 series.
It is permissible to use low−voltage machines with IP23 protection or less outdoors only
if special protective measures are taken.
Do not use the integrated brakes as fail−safe brakes. It cannot be ruled out that the
braking torque will be reduced due to disruptive factors that cannot be influenced.
¯ Drives
– ... must only be operated under the operating conditions and power limits
specified in this documentation.
– ... comply with the protection requirements of the EC Low−Voltage Directive.
Any other use shall be deemed inappropriate!
2.3 Foreseeable misuse
¯ Do not operate the motors
– ... in explosion−protected areas
– ... in aggressive environments (acid, gas, vapour, dust, oil)
– ... in water
– ... in radiation environments
Note!
Increased surface and corrosion protection can be achieved by using
adapted coating systems.
To Next Page
Loading...
Need help?
General
