Lenze L-force Communication 8400 motec Series User Manual

EDS84DMOTCAN EN 3.0 - 11/2011 L 13
Communication manual 8400 motec CANopen
Safety instructions
Device and application-specific safety instructions
 Only qualified personnel may work with and on Lenze drive and automation
components. In accordance with IEC 60364 and CENELEC, these are persons ...
– who are familiar with the installation, assembly, commissioning, and operation of
the product.
– who have the corresponding qualifications for their work.
– who know all regulations for the prevention of accidents, directives and laws
applicable on site and are able to apply them.
2.2 Device and application-specific safety instructions
 During operation, the communication unit must be connected to the wiring unit and
the drive unit.
 With external voltage supply, always use a separate power supply unit, safely
separated in accordance with EN 61800-5-1 in every control cabinet ("SELV"/"PELV").
 Only use cables that correspond to the given specifications.
Specification of the bus cable
( 26)
2.3 Residual hazards
Device protection
 The communication unit contains electronic components that can be damaged or
destroyed by electrostatic discharge.
Installation
( 22)
 Documentation of "Inverter Drives 8400 motec", control system, plant/machine
All other measures prescribed in this documentation must also be implemented.
Observe the safety instructions and application notes specified in the
documentation.

Lenze L-force Communication 8400 motec Series Specifications

General

Brand	Lenze
Model	L-force Communication 8400 motec Series
Category	Conference System
Language	English