Software Version 2.0 Release & Errata Notes
MC-12
21
5.1a THX Surround EX & 5.1a THX
@@@5.1a THX SurEx
• Available when Surround EX decoding is engaged. Surround
EX decoding is engaged when the SURROUND EX parameter is
set to ON. Refer to page 31 for more information about the
SURROUND EX parameter.
• Designed for playback of 5.1-channel analog film sources.
• Converts the 5.1-channel analog input into digital audio for
internal THX processing
• Allows the 5.1-channel analog input to utilize Surround EX
decoding, re-equalization, bass management, audio controls,
crossovers, and speaker distance calibration.
@@@
5.1a THX
• Available when Surround EX decoding is not engaged.
Surround EX decoding is not engaged when the SURROUND
EX parameter is set to OFF. Refer to page 31 for more
information about the SURROUND EX parameter.
• Designed for playback of 5.1-channel analog film sources.
• Converts the 5.1-channel analog input into digital audio for
internal THX processing
• Allows the 5.1-channel analog input to utilize re-equalization,
bass management, audio controls, crossovers, and speaker
distance calibration.
5.1a MODE ADJUST
5.1a SurEXMODE ADJUST
Default
Parameter Value Values
RE-EQUALIZER ON ON, OFF
SURROUND EX ON ON, OFF*
LFE MIX +0.0dB -10.0 to +0.0dB
OUTPUT LEVELS See page 5-17 for more information**
CUSTOM See page 5-17 for more information**
* The AUTO setting is NOT available for the 5.1a THX listening modes.
* Refers to the MC-12 User Guide (Rev 1).
Listening mode menu parameter descriptions begin on page 28 of this
document and on page 5-20 of the MC-12 User Guide (Rev 1).
v1.1
v1.1
To Next Page
Loading...
Need help?
General
