Lexmark Dot Matrix Compatibility Guide

Tray 1 supports approximately 120 sheets of card stock and Tray 2 supports approximately 250 sheets of card stock.
The multipurpose feeder supports approximately 50 sheets of card stock or labels, and the manual feed slot accepts
single sheets only. The following table lists the maximum weights supported.
Overview of card stock and label support
Paper source
Card stock Labels*
Index Bristol Tag Cover
Papergrain long grain short grain long grain short grain long grain short
Tray 1 (standard tray)
120 g/m
2
163 g/m
2
120 g/m
2
163 g/m
2
135 g/m
2
176 g/m
2
—
Tray 2 (optional tray)
120 g/m
2
163 g/m
2
120 g/m
2
163 g/m
2
135 g/m
2
176 g/m
2
—
Multipurpose feeder
Manual feed slot
120 g/m
2
163 g/m
2
120 g/m
2
163 g/m
2
135 g/m
2
176 g/m
2
135 g/m
2
* Vinyl labels are not supported.
Media specifications
Labels Width: 105–216 mm (4.1–8.5 in.)
Length: 220–297 mm (8.7–11.7 in.)
Weight:
120–163 g/m
2
(32–43 lb)
Thickness: 0.13–0.20 mm (0.005–0.008 in.)
Smoothness: 50–300 Sheffield*
* 50–150 Sheffield is optimal. This printer may support labels with smoothness of less than 50 Sheffield
such as coated paper, polyester, vinyl, or other synthetic facestock paper. Using media higher than 200
Sheffield could result in print quality degradation.
Card stock Weight:
Up to 163 g/m
2
Index Bristol (90 lb)
Up to 163 g/m
2
Tag (100 lb)
Cover stock Weight:
Up to 176 g/m
2
For more information on the supported media sizes, see the printer User's Guide on the publications CD.
Printer specifications 35

Lexmark Dot Matrix Specifications

General

Brand	Lexmark
Model	Dot Matrix
Category	All in One Printer
Language	English