Lexmark Dot Matrix Compatibility Guide

Card stock Weight:
Up to 163 g/m
2
Index Bristol (90 lb)
Up to 163 g/m
2
Tag (100 lb)
Note: To minimize curl, use the rear exit when printing on card stock and labels.
For more information, see “Maintenance procedures” on page 14.
Lexmark E250, E350, and E450n
Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using
vinyl or polyester labels.
The printer supports paper and label stock from 60–90 g/m
2
and index card stock up to 163 g/m
2
(43 lb). You can load
up to 50 label sheets in Tray 1. Card stock must be sent through the manual feeder one sheet at a time.
The following table lists the maximum weights supported by Tray 1, Tray 2, and the manual sheet feeder.
Overview of card stock and label support
Paper source
Card Stock Labels
Index Bristol Tag Cover Paper Vinyl
Tray 1 — — —
90 g/m
2
—
Tray 2 — — —
90 g/m
2
—
Manual Feed
163 g/m
2
163 g/m
2
—
90 g/m
2
—
Card stock should be grain short and set to exit the rear door.
For paper and transparency specifications, refer to the printer publications CD.
Media specifications
Labels Width: 210–216 mm (8.3–8.5 in.)
Length: 279–297 mm (11–11.7 in.)
Weight:
Up to 90 g/m
2
(24 lb)
Thickness: Up to 0.25 mm (0.01 in.)
Smoothness: 100–400* Sheffield
Printer specifications 73

Lexmark Dot Matrix Specifications

General

Brand	Lexmark
Model	Dot Matrix
Category	All in One Printer
Language	English