Using the manual feeder
The manual feeder is located inside the manual feeder door of the printer and can feed only one sheet of paper at a
time. You can use the manual feeder to quickly print on paper types or sizes that are not currently loaded in the tray.
1 Open the manual feeder door.
2 When the light is lit, load the paper faceup into the center of the manual feeder.
Notes:
• Load letterhead faceup, with the top of the sheet entering first.
• Load envelopes with the flap side down and with the stamp area as shown.
Loading paper and specialty media
46
To Next Page
Loading...
Need help?
General