Lexmark XC4143 User Manual

Maintaining the printer
Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and
supplies, may cause damage to your printer.
Adjusting the speaker volume
Adjusting the default internal speaker volume
The speaker volume will reset to default value after the session is logged out, when the printer wakes from
Sleep or Hibernate mode, or after a power‑on reset.
1 From the control panel, navigate to:
Settings > Device > Preferences > Audio Feedback
2 Select the volume.
Note: If Quiet Mode is enabled, then audible alerts are turned
o.
Adjusting the default headphone volume
1 From the control panel, navigate to:
Settings > Device > Accessibility
2 Adjust the headphone volume.
Note: The volume resets to the default value after the session is logged out or when the printer wakes
from Sleep or Hibernate mode.
Configuring
the fax speaker settings
1 From the home screen, touch Settings > Fax > Fax Setup > Speaker Settings.
2 Do the following:
• Set the Speaker Mode to Always On.
• Set the Speaker Volume to High.
• Activate the Ringer Volume.
Maintaining the printer 143

Lexmark XC4143 Specifications

General

Print Technology	Color Laser
Print Speed (Black)	43 ppm
Print Speed (Color)	43 ppm
Print Resolution	1200 x 1200 dpi
Scan Technology	CIS
ADF Capacity	100 sheets
Standard Input Capacity	650 sheets
Maximum Paper Input Capacity	2300 sheets
Standard Output Capacity	300 sheets
Duplex Printing	Yes
Display	7-inch color touch screen
Standard Memory	2048 MB
Maximum Memory	4096 MB
Processor Speed	1.2 GHz
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Connectivity	USB, Ethernet
Maximum Monthly Duty Cycle	100, 000 pages
Max Paper Size	A4