Lexmark XC4143 User Manual

Faxing
Setting up the printer to fax
Notes:
• The following connection methods are applicable only in some countries or regions.
• During the initial printer setup, clear the fax function check box and any other function you plan to set up
later, and then touch Continue.
• The indicator light may blink red if the fax function is enabled and not fully set up.
Warning—Potential Damage: Do not touch cables or the printer in the area shown while actively sending or
receiving a fax.
Configuring
the SMTP server for fax
From the control panel
1
From the control panel, touch Settings > Fax > Fax Server Setup > Fax Server E‑mail Settings.
2 Configure the settings.
Note: To use the SMTP server setting for e‑mail, enable Use E‑mail SMTP Server.
From the Embedded Web Server
1
Open a web browser, and then type the printer IP address in the address
field.
Faxing 47

Lexmark XC4143 Specifications

General

Print Technology	Color Laser
Print Speed (Black)	43 ppm
Print Speed (Color)	43 ppm
Print Resolution	1200 x 1200 dpi
Scan Technology	CIS
ADF Capacity	100 sheets
Standard Input Capacity	650 sheets
Maximum Paper Input Capacity	2300 sheets
Standard Output Capacity	300 sheets
Duplex Printing	Yes
Display	7-inch color touch screen
Standard Memory	2048 MB
Maximum Memory	4096 MB
Processor Speed	1.2 GHz
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Connectivity	USB, Ethernet
Maximum Monthly Duty Cycle	100, 000 pages
Max Paper Size	A4