EasyManuals Logo

Lexmark XC4143 User Manual

Lexmark XC4143
273 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #147 background imageLoading...
Page #147 background image
3 Open the printer properties, and then select the COM port from the list.
4 Set the COM port parameters in Device Manager.
Notes:
Serial printing reduces printing speed.
Make sure that the serial cable is connected to the serial port on your printer.
Cleaning printer parts
Cleaning the printer
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the
printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before
proceeding.
Notes:
Perform this task after every few months.
Damage to the printer caused by improper handling is not covered by the printer warranty.
1 Turn o the printer, and then unplug the power cord from the electrical outlet.
2 Remove paper from the standard bin and multipurpose feeder.
3 Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.
4 Wipe the outside of the printer with a damp, soft, lintfree cloth.
Notes:
Do not use household cleaners or detergents, as they may damage the finish of the printer.
Make sure that all areas of the printer are dry after cleaning.
5 Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of
fire
or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Maintaining the printer 147

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark XC4143 and is the answer not in the manual?

Lexmark XC4143 Specifications

General IconGeneral
Print TechnologyColor Laser
Print Speed (Black)43 ppm
Print Speed (Color)43 ppm
Print Resolution1200 x 1200 dpi
Scan TechnologyCIS
ADF Capacity100 sheets
Standard Input Capacity650 sheets
Maximum Paper Input Capacity2300 sheets
Standard Output Capacity300 sheets
Duplex PrintingYes
Display7-inch color touch screen
Standard Memory2048 MB
Maximum Memory4096 MB
Processor Speed1.2 GHz
Scan Resolution600 x 600 dpi
FunctionsPrint, Copy, Scan, Fax
ConnectivityUSB, Ethernet
Maximum Monthly Duty Cycle100, 000 pages
Max Paper SizeA4

Related product manuals