Lexmark XC4143 User Manual

Setting the fax date and time
1 From the home screen, touch Settings > Device > Preferences > Date and Time >
Configure
.
2 Configure the settings.
Configuring daylight saving time
1 From the home screen, touch Settings > Device > Preferences > Date and Time >
Configure
.
2 In the Time Zone menu, select (UTC+user) Custom.
3
Configure
the settings.
Using the automatic document feeder and scanner glass
Automatic document feeder (ADF) Scanner glass
• Use the ADF for multiple‑page or two-sided
documents.
• Load an original document faceup. For multiple‑page
documents, make sure to align the leading edge
before loading.
• Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
• Use the scanner glass for single‑page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
• Place the document facedown in the corner with the
arrow.
Sending a fax
Using the control panel
1 Load the original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Fax, and then enter the needed information.
3 If necessary,
configure
other fax settings.
4 Send the fax job.
Using the computer
Note: Make sure that the Universal Fax driver is installed.
Faxing 54

Lexmark XC4143 Specifications

General

Print Technology	Color Laser
Print Speed (Black)	43 ppm
Print Speed (Color)	43 ppm
Print Resolution	1200 x 1200 dpi
Scan Technology	CIS
ADF Capacity	100 sheets
Standard Input Capacity	650 sheets
Maximum Paper Input Capacity	2300 sheets
Standard Output Capacity	300 sheets
Duplex Printing	Yes
Display	7-inch color touch screen
Standard Memory	2048 MB
Maximum Memory	4096 MB
Processor Speed	1.2 GHz
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Connectivity	USB, Ethernet
Maximum Monthly Duty Cycle	100, 000 pages
Max Paper Size	A4