19
GETTING STARTED WITH YOUR PHONE
Making Calls
1. Make sure the phone is turned on. If not, press
for about 3 seconds.
2. Enter the phone number (include the area code if
needed).
3. Press .
lf the phone is locked, enter the lock code.
4. Press to end the call.
Correcting Dialing Mistakes
If you make a mistake while dialing a number, press
once to erase the last digit entered, or hold
down for at least 2 seconds to go to the
standby mode.
Redialing Calls
1. Press twice to redial the last number you
dialed. The last 30 numbers (dialing, incoming,
missed for each) are stored in the call history list
and you can also select one of these to redial.
Receiving Calls
1. When the phone rings or vibrates, press to
answer.
2. Press twice to end the call.
Note
If you press or (the side keys) while the
phone is ringing, the ringing or vibration is muted
for that call.
Note
If the phone is restricted, you can only dial phone
numbers saved in the Emergency Numbers or
your Contacts. To turn off this function:
Menu ->
Settings
->
Security
->
Enter
Lock Code
->
Restrict Calls
->
Off
->
OK
To Next Page
Loading...
Need help?
General
