7.1 Paired Devices
Pairing is the process that allows the handset to
locate, establish and register 1-to-1 connection with
the target device.
For pairing new Bluetooth
®
device
1. Press Left Soft Key , , , .
2. Follow the Bluetooth
®
accessory instructions to
set the device to pairing mode.
3. Press Right Soft Key for New. Select Search
New and press .
4. If Bluetooth
®
is set to off, you will be prompted to
turn power on. Select Yes and press .
5. The device will appear in the Found Devices menu
once it has been located. Highlight the device and
press .
6. The handset will prompt you for the passkey.
Consult the Bluetooth
®
accessory instructions for
the appropriate passkey (typically “0000” - 4
zeroes). Enter the passkey and press .
7. Once pairing is successful, select Yes and
press to connect with the device.
8. Once connected, you will see the device listed in
the Paired Devices menu and the Bluetooth
®
connected icon will show up on your idle
screen.
7.2 Power
Allows you to set the power On/Off.
1. Press Left Soft Key , , , .
2. Use to select a setting, then press .
On
/
Off
73
SETTINGS
Note
By default, your device’s Bluetooth functionality
is turned off.
To Next Page
Loading...
Need help?
General
