EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
48
This feature requires an always-on
broadband internet connection.
You do not need to connect to a PC
to use this function.
If Network Setting is not working,
check your network conditions. Check
the LAN cable and make sure your
router has DHCP turned on if you
wish to use the Auto Setting.
If the Network Setting is not com-
pleted, network may not operate nor-
mally.
IP Auto Setting: Select it if there is a
DHCP server on the local area net-
work (LAN) via wired connection, the
TV will automatically be allocated an
IP address. If you are using a router,
it (normally) will have the DHCP
server activated by default.
IP Manual Setting: Select it if there is
no DHCP server on the network and
you want to set the IP address manu-
ally.
Wired Network Setup
1
Select Enter.
IP Auto Setting
If you already set the
Network Setting
IP Manual Setting
If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network
settings to be adjusted.
For detail information, contact your internet provider or router manual.
Appeared when wired and
wireless are simultaneously
connected.
To Next Page
Loading...
Need help?
General
