To Next Page

To Previous Page

206-4334

Reference: Updating TV/PTC Software using a USB Memory Device

This section describes how to update TV (CPU) and/or PTC software using the TV Manager

“Update TV Software” and/or “Update PTC Software” option(s), respectively, though you may also

use the Ez Download utility to update software, if desired. See “Ez Download Utility” on pages 34

to 37 for further information.

Before You Begin

• Software update les must be stored in a folder named “LG_DTV” in the root directory of the

USB memory device.

• Ensure the USB device has been formatted with FAT format.

Update the TV/PTC Software

Note: You can check the TV/PTC software versions by accessing the Installer Menu with the

Installer Remote. See “Accessing the Installer Menu” on page 38 for further information. PTC and

CPU versions are displayed in the Installer Menu footer.

Note for TV CPU Software Update only: If the TV detects a software le on the USB device, it

will automatically display an Update TV Software screen, and if the le contains a later version of

software than is currently running on the TV, you can start the software update from this screen

(select UPDATE and press the Wheel [OK] button). Otherwise, you can exit the screen (select

CANCEL and press the Wheel [OK] button), and access the TV Manager as described below.

1. Turn ON the TV, and then insert the USB memory device into either of the USB ports on the TV.

Press the button on the Installer Remote to display the TV setup menus (TV is in Pass-

through Mode) or the Function Menu (TV is not in Pass-through Mode).

3. (TV in Pass-through Mode only) From the Quick Settings Menu displayed at the right of the

screen, select the All Settings menu icon and press the Wheel (OK) button to access the

advanced TV setup menus.

4. Use the arrow navigation keys to select/highlight either the General menu icon from the TV

setup menus or the Safety menu icon from the Function Menu. Then, press the number “7”

key a total of seven times to access the TV Manager (see example on following page).

Note: Ez Download is always selected by default when you initially access the TV Manager.

Also note that Diagnostics is for service use only.

5. If more than one USB memory device is currently connected to the TV, be sure to select the

USB device that contains the software le you wish to use. If necessary, use the arrow keys

on the Installer Remote to select/highlight the USB DEVICE button in the top right corner of

the screen and press the Wheel (OK) button. Then, use the Up/Down arrow keys to select the

appropriate USB device from the pop-up list of USB devices.

USB DEVICE

USB 1: Device 1

USB 2: Device 2

(Continued on next page)

LG 55EU960H User Manual

Questions and Answers: