LG 55EU960H User Manual

87
206-4334
Reference: Using the TV’s Zoning Features
This section describes the TV Zoning and Wi-Fi Zoning features available with the EU960H model TVs.
These features are primarily intended for use when the TV is congured for FTG Mode operation; however,
Wi-Fi Zoning, along with selected elements of TV Zoning (Installer Menu and Setup Menu prole Zone
assignments), may also be used with TV cloning processes using a Clone (.tlx) le. Refer to the appropriate
section(s) below for further information on the Zoning features and how to set the TV Zone # and/or Wi-Fi
Zone # in a TV that is currently in Pass-through Mode.
TV Zoning Feature
The TV Zoning feature enables you to create localized congurations for TVs in selected “Zones” within
the installation site, for example, a hotel lobby, tness center, restaurant, etc.
Using the TV Zoning Feature with FTG Mode Conguration
The Cloud Conguration Tool may be used to create an FTG Conguration (.tlx) le that contains multiple
Installer Menu and Setup Menu proles, each with its own Zone assignment. Up to nine unique Zones
can be designated for EU960H FTG Installer Menu and/or Setup Menu proles. Zone restrictions can also
be placed on individual channels in the FTG Channel Map. Thus, for example, you may create an FTG
Installer Menu and/or Setup Menu prole to uniquely congure a TV in the hotel lobby and also restrict the
channels that are available to be tuned on that TV.
The TV Zone # must be set appropriately on each TV in order for the TVs to be congured correctly. See
“Set the TV Zone # and/or Wi-Fi Zone # in the TV” on page 89, and set the TV Zone # in all the TVs in
a select area, so that the TVs are congured with corresponding FTG Installer Menu and/or Setup Menu
settings and/or can omit channels that have been restricted in the FTG Channel Map. TV Zone 0 is the
default TV Zone #.
The following subsections briey describe how to assign Zones in the Cloud Conguration Tool. Refer to
the Cloud Conguration Tool User Guide for further information.
FTG Installer Menu Prole Zone Assignments
The Cloud Conguration Tool / Installer Menu web page enables you to create multiple Installer Menu
proles for the same chassis model, each with a different Zone assignment (default = Zone 0), to be
included in an FTG Conguration (.tlx) le. For example, you may wish to create one Installer Menu prole
for the EU960H TV in the hotel lobby and another Installer Menu prole for the EU960H TV in the tness
center, both of which are different from the Installer Menu prole used for EU960H TVs in standard guest
rooms. The TV Zoning feature enables you to save multiple EU960H FTG Installer Menu proles, each with
its own Zone assignment, in one FTG Conguration le. If each TV in the aforementioned locations (Zones)
has had its TV Zone # set appropriately, as described in the procedure on page 89 or via the EZ-Manager
Wizard, the TV(s) will only be congured by the Installer Menu prole that matches its(their) Zone setting.
In the Cloud Conguration Tool / File Manager web page, you can also change the Zone assignment for
each Setup Menu prole already present in the FTG Conguration List. See the File Manager and Installer
Menu web page overviews on pages 62 and 64 for further information. Note that Setup Menu proles cannot
be created in the Cloud Conguration Tool; they must be saved (exported) from a TV.
FTG Channel Map Zone Restrictions
In the Cloud Conguration Tool / Channel Map web page, you can place Zone restrictions on individual
channels that may be prohibited or deemed unsuitable for certain locations. One or more Zone restrictions
(1–8) may be placed on each channel that is to be restricted. For example, if you wish to restrict a channel
from Zones 2 and 4, select both “Zone 2” and “Zone 4” in the Restricted from Zones eld when dening or
editing that channel.

LG 55EU960H Specifications

General

Brand	LG
Model	55EU960H
Category	TV
Language	English