(Power)
Turns the projector on or off.
S (Settings)
Selects or closes settings.
∧, ∨, ＜, ＞
Moves between menus and changes the settings.
(＜, ＞ button: The volume can be adjusted according
to the input mode.)
ꔉ(OK)
Shows the current mode and saves changes to the settings.
1 Due to the high temperature of the vent area, do not get close to the vent area.
2 Do not touch the lens while using the projector. The lens may be damaged.
NOTE
y
Air inlet ( Air filter)
It prevents dust or foreign objects from entering the product.
Clean the Air filter regularly. If the filter is damaged, replace it with a new one.
Part names
* The projector is manufactured using high-precision technology. You may,
however, see tiny black dots and/or bright colored dots (red, blue or
green) that continuously appear on the projector screen. This is a normal
result of the manufacturing process and does not indicate a malfunction.
Focus
Ring
Lens
2
Control Panel
Vent
1
Zoom ring
Bottom
Air inlet
( Air lter)
To Next Page
Loading...
Need help?
General
