LG BG630 User Manual

15
PREPARATION
Installation
Installation Precautions
y
Make sure to remove the protective
film attached to the projector.
- If you use the projector without
removing the protective lm, the
product may not work properly.
y
Place the projector in a well-ventilated
environment.
- To prevent internal heat from
building up, install the projector in
a well-ventilated place.
Do not place anything near the
projector as this may block its air
vents. If the air vents are blocked,
the internal temperature will in-
crease.
- Do not place the projector on a
carpet or rug. If a product has its
inlet vent on its bottom, do not
block the vent and use the product
on a leveled solid surface .
- Be sure to prevent foreign objects,
such as scraps of paper, from
entering the inlet vent.
- Leave an adequate distance (30 cm
or more) around the projector.
y
Do not place the product in a hot or
humid environment.
- Do not place the product in a hot,
cold, or humid environment.
y
Do not place the product in a dusty
place.
- This may cause fire.
y
Never open any cover on the projec-
tor. There is a high risk of electric
shock.
y
The projector is manufactured using
high-precision technology. You may,
however, see tiny black dots and/
or bright colored dots (red, blue or
green) that continuously appear on
the projector screen. This is a normal
result of the manufacturing process
and does not indicate a malfunction.
y
The remote control may not work
in an environment where a lamp
equipped with electronic ballasts or
a three-wavelength fluorescent lamp
is installed. Replace the lamp with an
international standard lamp for the
remote control to work normally.

LG BG630 Specifications

General

Brand	LG
Model	BG630
Category	Projector
Language	English