SETUP
33
Pre-operation Setup (Continued)
Finalize
Finalizing ‘fixes’ the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu for
navigating the disc. This is accessed by pressing
MENU/LIST or TITLE.
Caution
After you’ve finalized a disc recording on a DVD-R,
DVD-RW, or a DVD+R disc, you can’t edit or record
anything else on that disc except on a DVD+RW
disc.
11
Follow steps 1-3 as shown on page 32
(Initialize).
22
Use v / V to select the Finalize option.
33
Press B to move to the third level.
Finalize is highlighted.
44
Press ENTER.
Finalize menu appears.
55
Select “Ok” then press ENTER.
The recorder starts finalizing the disc.
Note :
How long finalization takes depends on the type of disc,
how much is recorded on the disc, and the number of
titles on the disc. A heavily recorded disc can take up to
4 minutes or more to finalize.
Tip
If you load a DVD-RW that has already been finalized,
you can ‘unfinalize’ it by choosing Unfinalize from the
Finalize menu. After doing this, you can edit and re-
record onto the disc.
Disc Label
Use this to enter a name for the disc. This name
appears when you load the disc and when you display
disc information on-screen.
• The disc name can be up to 32 characters long.
• For discs formatted on a different DVD Recorder
Receiver, you will see only a limited number of char-
acters.
11
Follow steps 1-3 as shown Initialize on page 32.
22
Use v / V to select the Disc Label option.
33
Press B to move to the third level.
“Edit” icon is highlighted.
44
Press ENTER.
Keyboard menu appears.
55
Enter a name for the disc. Use vVbBto select
a character then press ENTER to confirm your
selection.
• Alphabet Capital: Switches the keyboard to
upper case characters.
• Alphabet Small: Switches the keyboard to lower
case characters.
• Symbols: Switches the keyboard to symbol char-
acters.
• OK: Select to finish.
•Cancel: Select to exit the menu.
• Space: Inserts a space at the cursor position.
• Delete: Deletes the previous character at the
cursor position.
• b / B: Moves cursor to left or right.
66
Choose OK then press ENTER to save the name
and return to the Setup menu.
77
Press SETUP to exit the menu.
To Next Page
Loading...
Need help?
General
