54
Title and Chapter Editing (Continued)
Naming a Title
You can name titles independently.
11
On the Title List menu, use vVbBto choose
the title you want to name then press ENTER.
Options appears on the left side of the menu.
22
Use vVbBto select the ‘Title Name’ option
then press ENTER.
Keyboard menu appears.
33
Enter a name for the title. Use vVbBto select
a character then press ENTER to confirm your
selection. Refer to step 5 as shown on page 33
(Disc Label).
44
Choose OK then press ENTER to save the name
and return to the previous menu display.
55
Press RETURN (O) repeatedly to exit the
menu.
Notes :
• Names can be up to 32 characters long.
• For discs formatted on a different DVD Recorder
Receiver, you will see only a limited character set.
• When recording on DVD-R, DVD+R or DVD+RW
discs, the entered name is displayed on the DVD
Recorder Receiver only after finalization.
Combining Two Chapters Into One
Use this function to combine two adjacent Playlist or
Original chapters into one.
Note :
This function is not available if there is only one chapter
within the title.
11
On the Chapter List menu, select the first chap-
ter of the two chapters you want to combine
then press ENTER.
Chapter List options appear on the left side of the
menu.
22
Use vVbBto select ‘Combine’.
The combine indicator appears between the two
chapters you want to combine.
33
Press ENTER to confirm.
After pressing ENTER, the updated menu is dis-
played.
+R+RWVR
+R+RW
Video
VR
To Next Page
Loading...
Need help?
General
