Connecting 13
Connecting
2
Speaker Connection
Wireless connection
LED indicator of wireless subwoofer
LED Color Operation
Yellow The wireless subwoofer is
receiving the signal of the
unit.
Yellow (blink) The wireless subwoofer is
trying to connect.
Red The Wireless subwoofer is
in standby mode.
Off (No
display)
The Wireless subwoofer is
turned off.
Initial setting of an ID for the
wireless subwoofer
1. Connect the power cord of the Wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.
Setting an ID for the wireless
subwoofer
When the unit is manufactured, the ID is
already set. If interference occurs or you use
a new wireless subwoofer, an ID should be set
again.
1. Press HOME
( )
.
2. Use
A/D
to select the [Settings] and
press ENTER (
b
). The [Settings] menu
appears.
3. Use
W/S
to select [AUDIO] option then
press
D
to move to the second level.
4. Use
W/S
to select the [Connect wireless
speakers] option then press ENTER (
b
) or
D
to move to the third level.
The [Wireless Speaker Connection Guide]
appears.
5. Press PAIRING button on the subwoofer.
- If you see the yellow LED indicator light,
pairing was successful.
6. Select [Speaker test] for wireless speaker
connection test by using ENTER (
b
).
y
If there is a strong electromagnetic wave
product nearby, interference may occur. Put
the unit (Wireless subwoofer and main unit)
away from there.
y
If you operate main unit then wireless
subwoofer sound within a few seconds in
standby mode.
y
Set the distance between this unit and
subwoofer Receiver within 10 m (32 ft.).
y
Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since
communication failure may occur if longer
distance is used.
y
It takes a few seconds (and may take longer)
for the Wireless Transmitter and subwoofer
to communicate with each other.
,
Note
13
To Next Page
Loading...
Need help?
General
Weight and Dimensions
