LG PF1000U User Manual

52
ENTERTAINMENT
TipsforNetworkSettings
• Use a standard LAN cable (Cat5 or higher with RJ45 connector,
10 Base-T or 100 Base TX LAN port).
• Resetting your modem can cause network connection problems. To
resolve the problem, turn the power off, disconnect and reconnect, and
then turn the power back on.
• LG Electronics is not responsible for any network connection problems
or any faults, malfunctions and errors caused by an network connection.
• A network connection may not work properly depending on the Internet
service provider.
• A DSL modem is required for a DSL service; a cable modem is required
for a cable service. Only a limited number of network connections
may be available, and projector network setting may not be available
depending on your contract with your Internet Service Provider (ISP.)
(If only one device is allowed per line and the PC is already connected,
other devices cannot be used.)
• Wireless networks can be subject to interference from other devices
operating at a frequency of 2.4 GHz (wireless phones, Bluetooth
devices, or microwave ovens). There may also be interference from
devices with a frequency of 5 GHz, same as other Wi-Fi devices.
• The surrounding wireless environment can cause the wireless network
service to run slowly.
• If you do not turn off the entire local home network, network traffic may
occur on some devices.
• For an AP connection, an access point device that supports wireless
connection is required and the wireless connection feature must
be enabled on the device. Contact your service provider regarding
availability of wireless connection on your access point.
• Check the SSID and security settings of the AP for AP connection. Refer
to the appropriate documentation for SSID and security settings of the
AP.
• Invalid settings on network devices (wired/wireless line sharer, hub)
can cause the projector to run slowly or not operate properly. Install
the devices correctly according to the appropriate manual and set the
network.
• Connection method may differ according to the AP manufacturer.

LG PF1000U Specifications

General

Type	led
Display	dlp
TV Tuner	yes
Noise Level	24 decibels
Color Brightness	1000 lumens
White Brightness	1000 lumens
Resolution	full hd (1080p)
Native Resolution	1920 x 1080
Contrast Ratio	150, 000:1
Aspect Ratio	16:9
Throw Ratio Range	0.29
Response Time	70 milliseconds
HDR	no
3 Chip Technology	no
Screen Mirroring	mobile to screen
Keystone Effect	yes
3D	yes
Minimum Screen Size	60 inches
Maximum Screen Size	100 inches
Focus Adjustment	manual
Optical Zoom	none
Digital Zoom	yes
Minimum Distance	0.42 feet
Maximum Distance	1.25 feet
HDMI ARC Ports	yes
Wireless HDMI	none
USB Ports	2
Video Input	composite video
Inputs	hdmi, usb type a, composite video
Bluetooth	true, 3.0 + hs
Sound Mode	stereo
Built In Speakers	yes
Speakers Output	3 watts
Voice Assistant	no
Remote Control	yes
OS Compatibility	windows, android

Weight and Dimensions

Depth	11.1 inches
Height	4.5 inches
Width	5.2 inches
Net Weight	4.85 pounds