LG WT-R10(~3)3(7)1(3,5)TP(H) User Manual

2. INSTALLATION INSTRUCTIONS
4
2-1. HOW TO INSTALL THE WASHING MACHINE
Selection of the installing place
Install the washer on the horizontal solid floor.
If the washer is installed on an unsuitable floor,it could make considerable noise and vibration.
Do not install the washer in the following places
Where the washer is exposed to direct sunlight.
Near a heater or heating appliance.
Where the washer is exposed to freezing temperatures.
In damp environments such as bathrooms or harmful
environments such as near a coal gas source.
The proper installation of the washing machine can increase the wash effectiveness and the life of it.
If the washer is installed on an inclined floor, it could make considerable noises and vibration
and could cause a malfunction.
Use the adjustable leg spindle to adjust the level of washing so that it sits properly.
Install the washing machine on a level and firm surface.
Keep the washing machine more than 10cm from the wall to prevent vibration noise
during spinning
The base opening must not be obstructed by carpeting when the washing machine is
installed on a carpeted floor.
Wooden floors may need reinforcing to prevent the normal vibration which occurs with an
unbalanced load.
10cm
10cm
10cm

LG WT-R10(~3)3(7)1(3,5)TP(H) Specifications

General

Power Sourse	Refer to rating label on the back of Washer
Input	Refer to rating label on the back of Washer
Rating of Fuse	250V, 8A for 220~240V/50Hz 125V, 12A for100~127V/60Hz
Auto Power Off	Applied
Capacity	Refer to rating label on the back of Washer
Spin Speed	710 50
Lint Filter	Double
Softener Dispenser	Applied
Detergent Dispenser	Applied
Bleach Inlet	Applied
Inner Tub	Stainless
Inlet Water Pressure	0.3kgf/cm2~ 8kgf/cm2
Water Level	7 Stages
Reservation	Available for 3 ~ 24 Hr
Program	DELICATE, WOOL, NORMAL, SPEEDY, JEAN
Lid Interlock Switch	Magnet Sensor
Child Lock	Applied

Weight and Dimensions

Dim.	Refer to rating label on the back of Washer
Weight	Refer to rating label on the back of Washer