Lightware 4x4DVI-DL User Manual

Version 1.0 Page 22 / 43
4. Software control - Lightware Matrix Controller
The unit can be controlled using Lightware Matrix Controller from a PC computer or Laptop
through RS 232 or Ethernet port.
4.1 INSTALLING MATRIX CONTROLLER
Info Windows firewall should be switched off to enable the IP search feautre!
Info If older version of control software is installed please uninstall it before installing a
newer version (see section 7.)
Info The control software requires Java runtime environment v1.5 or higher. This can be
found in the supplied CD’s Java Installer directory, or downloaded from Sun’s
website:
http://dlc.sun.com/jdk/jre-1_5_0_01-windows-i586-p.exe
1. Run Installer_LW_bundle_v x.xx.exe
(x.xx refers to actual revision - currently v 2.49)
2. Select destination folder and click Install (Using the default path is highly
recommended)
3. If Java is already installed the following pop-up window will appear:
4. Click OK button.

Lightware 4x4DVI-DL Specifications

General

Brand	Lightware
Model	4x4DVI-DL
Category	Matrix Switcher
Language	English