MMX4x2 series – User's Manual 132
Emulating an EDID to an Input Port
Command and Response
ç <source>:<destination>)
æ
Parameters
Parameter Parameter description
<source> Source EDID memory place
F1-F120
Factory EDIDs
U1-U14
User EDIDs
D1-D2
Dynamic EDIDs
<destination> The emulated EDID memory of the desired input port
U1-U14
User EDIDs
Example
ç
æ
Emulating an EDID to All Input Ports
Command and Response
ç <source>)
æ
Parameters
Parameter Parameter description
<source> Source EDID memory place
F1-F120
Factory EDIDs
U1-U14
User EDIDs
D1-D2
Dynamic EDIDs
Example
ç
æ
Copying an EDID to User Memory
Command and Response
ç <source>:<destination>)
æ
Parameters
Parameter Parameter description
<source> Source EDID memory place
F1-F120
Factory EDIDs
U1-U14
User EDIDs
D1-D2
Dynamic EDIDs
<destination> The emulated EDID memory of the desired input port
U1-U14
User EDIDs
Example
ç
æ
Deleting an EDID from User Memory
Command and Response
ç <user_edid>)
æ
Parameters
Parameter Parameter description
<user_edid> The emulated EDID memory of the desired input port.
U1-U14
User EDIDs
Example
ç
æ
Resetting the Emulated EDIDs
Command and Response
ç
æ
Parameters
Parameter Parameter description
<user_edid> The emulated EDID memory of the desired input port.
U1-U14
User EDIDs
Example
ç
æ
Calling this method switches all emulated EDIDs to a factory default one. See the table in the Factory EDID
section.