MMX4x2 series – User's Manual 87
Control Lock
Command and Response #lockbutton #buttonlock
ç <lock_status>
æ <lock_status>
Parameters
Parameter Parameter description
<lock_status> Front panel button
locking status
0
None: all functions of the front panel button are enabled.
1
The front panel buttons are locked but can be unlocked
by a button combination. See the details in the Control
section.
2
The front panel buttons are locked and cannot be
Status
Example
ç
æ
Identifying the Device
Command and Response #identifyme
ç
æ
Example
ç
æ
Toggling the Dark Mode Setting
DIFFERENCE:
#darkmode
Command and Response
ç <mode_state>
æ <mode_state>
Parameters
If the <mode_state> parameter is true (or 1), the Dark mode function is enabled, if the parameter is false (or 0),
the function is disabled.
Example
ç
æ
Setting the Delay of the Dark Mode Setting
DIFFERENCE:
The Dark mode can be enabled right away, or after a certain time. Thus the mode is enabled if no buttons
function of the button itself. The delay time can be set by this command.
Command and Response
ç <delay_time>
æ <delay_time>
Parameters
The <delay_time> parameter means seconds, and the default value is 60. If set to 0, no delay is applied
and the Dark mode can be enabled immediately by the DarkModeEnable property. This delay affects the
wakeFromDarkMode method as well.
Example
ç
æ
To Next Page
Loading...
Need help?
General
