MMX4x2 series – User's Manual 64
Settings Menu
Status
Status tab in Settings menu
The most important hardware and software related information can be found on this tab: hardware and
be changed to a unique description by the Set button.
Please note that the Miniweb-related descriptions can be found in The Built-in Miniweb section.
If you click on the Identify me
feature helps to identify the device itself in the rack shelf.
#devicelabel #label #producttype #rmwareversion #identifyme #status
#serialnumber
Network
Network tab in Settings menu
General
IP address and DHCP settings can be set on this tab. Always press the Apply settings button to save changes.
Factory defaults settings can be recalled with a dedicated button.
The IP Port Block feature is an additional protection for the Cleartext login, see the
Settings)
port no.10001 shall be blocked manually. #dhcp #ipaddress #network #portblock
To Next Page
Loading...
Need help?
General
