Linksys RV042 User Manual

59
Chapter 6: Set Up and Configure the Router
Wizard Tab
10/100 4-Port VPN Router
6. The next screen, Figure 6-57, is for selecting the WAN (or Internet) Connection Type for your WAN2 port when
using it as a WAN (or Internet) port. Select Obtain an IP automatically, Static IP, or PPPoE, depending on which
type is used by your ISP. Click Next to continue. Click Previous if you want to return to the previous screen.
Click Exit if you want to exit the wizard.
7. The next screen that appears depends on your WAN (or Internet) Connection Type selection for your WAN2
port.
If you chose Obtain an IP automatically, Figure 6-58 appears. Select Use DNS Server provided by ISP
(default) or Use the Following DNS Server Addresses, if you want to enter a specific IP. Click Next to
continue. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the wizard.
Figure 6-57: WAN Connection Type WAN2
Figure 6-58: Obtain an IP WAN2

Linksys RV042 Specifications

General

Brand	Linksys
Model	RV042
Category	Network Router
Language	English