Logik L19LDVB19 User Manual

GB-14
Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification
and Safety Warnings
A pop-up screen will be displayed, press the 6. buttons to
select the Country where you will operate the TV.
Press the 7.
button to select Start on the screen and then press
the ENTER/OK button on the remote control to start the Auto
Tuning.
Select Cancel on the screen or press the EXIT button to cancel
the New Installation. An installation reminder will appear the
next time you turn on the TV.
Turning the TV On for the First Time
Connect the mains cable to the mains socket after you have 1.
completed all the connections. The TV enters standby mode and
the power LED on the front panel of the TV will illuminate.
In standby mode, press the2.
/ I button on the top panel of the
TV or the
button on the remote control to turn the TV on. The
power LED will go off.
Always disconnect the TV from the mains socket when not in
use for a long period of time.
The
/ I button on the top panel of the TV or the button
on the remote control is only used for switching the TV into
standby, it does not disconnect the TV from the mains power.
To completely disconnect the mains power, please remove
the mains plug from the mains socket.
The first time you turn the TV on, it will go straight into the 3. New
Installation menu.
Press the 4.
buttons to select your desired language to be
displayed on the menu.
To mains socket
Press the 5. button and then press the ENTER/OK button or the
button to select Auto Tuning.

Logik L19LDVB19 Specifications

General

Brand	Logik
Model	L19LDVB19
Category	LCD TV
Language	English