32
Maintenance After a Prolonged Period of
Non-Operation
If you are not going to use the unit for a prolonged period of time, you are advised to:
1. Disconnect the dishwasher from the mains.
2. Disconnect the dishwasher from the water inlet and drain. Use a suitable receptacle to catch
any residual water in the pipes.
3. Slightly open the door to prevent unpleasant smells building up in the compartment.
4. Ensure the washing compartment of the dishwasher is clean.
Hints and Tips
Repairs should only be carried out by a qualied technician in strict accordance with
current local and national safety regulations. Unauthorised or incorrect repairs could
cause personal injury or damage to the unit.
Before calling for service, please refer to the “Technical Problems” and “General
Problems” sections to solve some general problems by yourself.
Technical Problems
Problem Possible Causes Remedy
The dishwasher does not
start.
The door is not properly
closed.
Close the door firmly.
The unit is not connected
to the mains socket.
Connect the mains plug to the
mains socket.
The unit is not switched on.
Press the On/O button and
select a programme.
The drain pump is not
working properly.
The anti-flooding system
has operated.
• Disconnect from the mains.
• Disconnect the water inlet.
• Call a qualified technician.
Rapid and 90 min
programme indicators
blinking rapidly (blink 5
times faster than normal
operation blinking)
Malfunction of heating
element; required
temperature not reached.
• Disconnect from the mains.
• Disconnect the water inlet.
• Call a qualified technician.
LID60W20_IB_RC_Final210603.indd 32LID60W20_IB_RC_Final210603.indd 32 3/6/2021 5:43 PM3/6/2021 5:43 PM
To Next Page
Loading...
Need help?
General
