5
1. Please ensure the dishwasher is installed
by a qualied technician. Refer to the tools
required.
Location
When selecting a position for your dishwasher you should make sure the installation surface
is at and rm, and the room is well ventilated. Avoid locating your dishwasher near a heat
source, eg. cooker, boiler or radiator. Extreme cold ambient temperatures may also cause
the appliance not to perform properly. This dishwasher is not designed for use in a garage or
outdoors.
Do not cover the dishwasher. When installing, ensure that free space is left at the sides.
2. Ensure there is clearance each side of the
unit to allow slight sideways movement for
servicing when required. Good levelling
is essential for correct closure and sealing
of the door. When the unit is correctly
levelled, the door should not catch the inner
liner on either side of the cabinet. Adjust
the levelling feet to obtain the optimum
levelling of the unit.
The gure outlines the minimum
dimensions required to accommodate the
dishwasher within tted kitchen furniture
units.
598
550
815
units in mm
All parts removed must be saved to do the reinstallation in the future. Ensure the
dishwasher is unplugged and empty. We recommend that 2 people handle the
dishwasher during installation.
The supplied door template also
contains installation steps which will
assist installation.
LID60W20_IB_RC_Final210603.indd 5LID60W20_IB_RC_Final210603.indd 5 3/6/2021 5:42 PM3/6/2021 5:42 PM
To Next Page
Loading...
Need help?
General
