Logitech Harmony 525 User Manual

9
Controlling your devices individually
In some cases, you may want to control a device individually. You can use the device feature of the
Harmony 525 to control devices one-by-one.
When you press the Device button, the Harmony 525 screen displays a list of your devices. Select
the device you wish to control by pressing the side LCD button closest to your selection. After you
select a device, the Harmony 525 controls only that device. You have access to all the commands
for the device included in your Harmony 525 configuration.
Once you’ve finished, return to Activities for the optimal control of your entertainment system.
To set the length of time the backlight stays on, follow these steps:
From your Harmony Remote Software:
Select 1. Remote Settings.
Select 2. Display Settings.
Setting the backlight timing
Using the Coloured Buttons (Teletext)
If your TV is programmed to send and receive Teletext content, when you press any of the
Coloured buttons (Teletext), the home page for Coloured buttons will appear on the television
(it may take a few seconds for the page to appear). The Teletext page will completely replace
the television picture, but sound will still be available. Each Teletext page has a unique 3-digit
page number; all pages can be accessed by entering the 3-digit page number using the
numbered channel buttons on your Harmony remote.
While Teletext is the default setting for these coloured buttons
in the Watch TV Activity, you can customize these buttons
to send different commands in other Activities. See Adding
custom-labeled buttons to an Activity.
Using the Glow Button
Press the Glow button to light up or turn off the display backlight. To determine the length of
time the backlight stays on.
Note: Shaking or tilting the Harmony remote will not light up the display backlight. Users must
press the Glow button to light up the display backlight. The remote will go into Deep Sleep
mode when the remote detects no motion for two hours. The remote will begin motion
sensing in Deep Sleep mode, and can be sensitive to movement.

Logitech Harmony 525 Specifications

General

LCD Size	1.5" Diagonal
LCD Resolution	96 x 64
LCD Screen	Monochrome
Power Source	4 x AAA batteries
Power Type	Alkaline
Brands Supported	5, 000+
Devices Supported	225, 000+
Maximum number of devices per account	10
Backlit keypad	Yes
Backlight Color	Blue
IR Learning	Yes (Up to 250 Khz)
IR Transmit	15.625 kHz to 500 kHz
Learning Capabilities	Any IR Device
IR Transmitters	2
IR Transmission Range	Up to 30ft
Warranty	2 Years
Memory Type	Flash
Memory Amount	512 KB
Supported Platforms	Windows 2000/XP/Vista MAC OS X 10.3 +

Weight and Dimensions

Weight	5.4 oz (with battery installed)
Dimensions	1.9” x 8.0”