4 -31
(9) Recommended Maximum Specification of Implements
When attaching implements to the tractor, refer to the followings recommended as maximum
specification of each implement. DO NOT attach a bigger implement than this specification. For
other implements, contact your authorized dealer.
No. Implements Specification MT2 25S
1 Trailer Max vertical load See chapter 4-5-(3) in this manual
2 Mid mower Max cutting width 1524 mm (60 in.)
3
Rear mounted
mower
Max cutting width 1524 mm (60 in.)
4 Flail Mower Max cutting width 1524 mm (60 in.)
5 Sickle Bar Max cutting width 1524 mm (60 in.)
6
Rear mounted
Sprayer
Total weight 150 kg (331 lb.)
7 Pull type Sprayer Total weight See chapter 4-5-(3) in this manual
8 Rotary Tiller Max tilling width 1280 mm (50 in.)
9 Furrow Plow Max tilling width -
10 Bottom Plow Maximum size 1100 mm (43 in.)
11
Disk harrow
(pull type)
Max working width -
12 Chisel Plow Max working width -
13 Front grader Max working width 1400 mm (55 in.)
14 Rear blade Max working width 1372 mm (54 in.)
15 Front loader
Max lift capacity
(Bucket pivot point)
529 kg (1166 lb)
16 Landscape Rake Max working width 1524 mm (60 in.)
17 Box blade Max working width 1280 mm (50 in.)
18 Backhoe
Max weight
(W/O Bucket)
321 kg (708 lb)
19 Snow Blade Max. working width 1370 mm (54 in.)
20 Snow Blower Max. working width 1370 mm (54 in.)
To Next Page
Loading...
Need help?
General
