3 -11
(7) HST forward / reverse pedal
(HST type)
Press down the HST forward pedal slowly in
order to move the tractor forward.
If releasing the HST pedal, it returns back to the
neutral position and tractor will be stopped.
The deeper the pedal is pressed down, the
faster the tractor shall drive.
The HST reverse pedal is worked in the same
way of the HST forward pedal operation.
warning
▶ When releasing the HST pedal while driving in high speed, the braking distance
can be extended depending on the load conditions. At this time, press down the
brake pedal(s) to stop the tractor.
▶ DO NOT operate the HST pedal hastily. It may cause a shock to you.
HST forward pedal
(8) Cruise control lever
(HST type)
For cruise control drive, lift up the cruise control
lever in the state of pressing the HST forward
pedal. And then, the HST pedal shall be fixed at
that position and the driving speed will be
maintained constantly.
To exit the cruise drive;
1) Press down the brake pedal or
2) Press down the HST forward pedal little more.
And then, The HST forward pedal returns to the
neutral position and the cruise control drive will
be stopped.
▶ During the cruise control drive, do not press down the HST reverse pedal to exit
the cruise control drive or to reverse the tractor. After stopping the cruise control
drive, press down the HST reverse pedal.
▶ DO NOT try to move the cruise control lever in order to stop the cruise control
drive. It may cause a failure of the cruise control linkage system.
warning
Cruise control lever
Cruise drive
HST reverse pedal
To Next Page
Loading...
Need help?
General
