3 -26
Creeper gear lever
Creeper range
Standard
▶As the driving force of the rear axle is very high when working in creeper speed
range, the machine may not be stopped even if you press the brake pedals.
In this case, depress the clutch pedal to cut off the engine power and press down
the brake pedals.
Caution
(18) Creeper gear lever
(Mechanical, if fitted)
It is used to work with very low driving speed
(creeper speed). When doing general work or
traveling on the road, select the standard speed.
Move the lever downward for creeper speed.
Before operating the creeper gear lever, press
down the clutch pedal, brake pedals and stop
the tractor completely.
For driving speed, refer to the chapter 4-6,
“Driving speed” in this manual.
To Next Page
Loading...
Need help?
General
