4 -7
â–¶Release the clutch pedal slowly. If not, the transmission gear life shall be reduced
and it may cause a sudden start.
Notice
Range gear shift lever
Parking brake lever
Clutch pedal
Cabin
(2) How to drive
Mechanical type
1. Lift up all the implements (front/middle/rear)
from the ground after starting engine.
3. Depress clutch pedal fully and place all the
transmission gear levers (main, range,
shuttle lever) on a suitable position.
4. After pressing brake pedals down, release
the parking brake lever.
5. Release clutch pedal slowly with pressing
down the throttle pedal slowly.
2. Place the throttle lever to the low speed
position.
Range gear shift lever
Roll-bar
Main gear shift lever
Main gear shift lever
Parking brake lever
Throttle lever
To Next Page
Loading...
Need help?
General
